ABOUT US

Breakthrough

  • about1

Santhai

INTRODUCTION

Wenzhou Santhai Valve Pipe Fitting Co., Ltd. is a set design, production, sales and service in one of the modern enterprise. Specialized in stainless steel health-class fluid accessories, butterfly valves, ball valves, clamp by any set, any live by any set, pipe fittings and non-standard accessories and other products sales and services, products are widely used in food, pharmaceutical water treatment, complete sets of equipment, beer equipment and other fields.

  • -
    It started in 2006
  • -
    The company has an independent forging plant
  • -+
    The company covers an area of about 2.5 W square meters
  • -+
    More than 230 employees

products

Innovation

  • Clamped Elbow Y-Type Sanitary Filter

    Clamped Elbow Y-Type S...

    Operating Principles ▪ The filter consists of a filter body with an inlet and outlet. Filter mesh is installed inside the filter body,the mesh retain all particles,which is equal or larger than mesh. When surrounding pressure of the filter exceeds demand, or when the filter element is damaged, you can remove it,then clean or change a new filter element which is used after reinstallation. Materials ▪ Filter housing: 304/316L ▪ Metal mesh: 304/316L ▪ Perforated plate: 304/316L ▪ Gasket: EPDM ▪ ...

  • Welded Angle -Sanitary Filter

    Welded Angle -Sanitary...

    Product Description Operation Mode is automatic operation (can also be manual operation) , it has dual functions of differential pressure and automatic sewage discharge. When the water flows through the filter, the mechanical impurities in the water are intercepted by the filter screen, when the accumulation of impurities on the surface of the filter screen increases and the pressure difference reaches the set pressure difference, the pressure difference switch sends out a signal, and the PLC...

  • Double Seat Mix Proof Valve *304/316L

    Double Seat Mix Proof ...

    Operating principles ▪ Basic double seat mix proof valve is controled through compressed air. The valve is a normally closed (NC) valve. ▪ The double seat valve has two divided seals of valve disc. It has a interlinked cavity of leak the two seals which working. When it happens leaking,the products will inpour the cavity and flow away from exit. It won not cause any pullution or mixing. The leaking cavity closed while the valve working. It is impossible to overflow for the products. so the pr...

  • Stop and Reversing Valve *Seals: EPDM

    Stop and Reversing Val...

    Operating principles ▪ The divert seat valve series is remotely operated by compressed air. By the relative position of the control valve to open or close the purposes of the valve, changing the medium flow (commutated). ▪ Manual shut-off valve series through the handle single-seat control, change the media flow (commutated). Technical Data ▪ Maximum product pressure: 1000kpa (10bar) ▪ Minimum product pressure: Full vacuum ▪ Temperature range: -10 ℃~135 ℃ (use EPDM seal material) ▪ Pressure...

NEWS

Service First